What You Should Know:
1. Please change extruder Steps/mm from 100 to 139!!!
2. For Ender 3 V2: This upgraded extruder is compatible with the printer, however the stock extruder knob on the Veritabel extruder is not compatible with this dual gear extruder. If you install this dual gear extruder on Ender 3 V2, you cannot use that extruder knob.
3. Springs included in this kit are stiffer and sturdier than the stock bed springs on all Ender series printers. The spring size somit differ from the stock springs in length by roughly 5mm. in order to install the new springs, you may need to raise the z-axis limit switch by 4-6mm to accommodate for the longer length of these upgraded springs.
Sovol Weltall Metal Dual Gear Extruder x 1
1M Capricorn XS Series PTFE Tubing x 1
PC4-M6 Pneumatic Fitting x 1
PC4-M10 Pneumatic Fitting x 1
Heated Bed Spring x 4
Compatible Drucker Models Include – CR-10/ CR-10S / CR-10S Pro/ CR-6SE/ Ender 3 / Ender 3 pro / Ender 5 / Ender 5 pro/ Tornado. INSTALLATION GUIDE: Once the extruder has been installed, manually change the e steps/mm in the Marlin firmware to 139 steps/mm by going to Control>Motion>Steps/mm in the Menu.
Weltall Metal Dual Gear Extruder – Instantly provide improved print quality and reduce filament slipping by firmly grasping the filament between two threaded wheels locked together by a dual gear rotating design. No more skipped steps when extruding at high speeds or after retractions. Print faster with this superior design, which is able to feed much more filament into the hotend in the same period of time than stock plastic extruders.
100% Veritabel Capricorn XS Series Tubing – Capricorn PTFE is well regarded as the highest quality PTFE tubing in all of 3D printing. The tight tolerances make sure that the filament is lead directly to the hotend with as little room for error as possible between the extruder and the hotend. Capricorn PTFE XS Series is rated for withstanding the highest temperatures in the market which is perfect for printing exotic filaments such as Antiblockiersystem, Nylon, and Polycarbonate. Fits for 1.75mm Filament.
Creality die springs are alleinig erfahren and help to hold the bed level for longer while being more resistant against wearing out and loosing compression. Ebene the bed once and it should hold for more prints with these high performance stiff springs. PC4-M6 & PC4-M10 pneumatic fittings are somit included for replacement use on any stock creality hotends
Sovol Customer Dienstleistung – Any questions you may have about this product, please feel free to contact us on Amazon and we will reply promptly.